| Name | National Instruments PXIe-5122 High-Speed Digitizer |
National Instruments PXIe-5122 High-Speed Digitizer
The National Instruments PXIe-5122 (Part Numbers: 779967-01, 779967-02, and 779967-03) High-Speed Digitizer, based on the the SMC engineering, accompanies fast memory choices from 8 to 512 MB for each channel (4 to 256 million 14-bit tests per channel). The NI PXIe-5122 acquires more than 1 million triggered waveforms without software intervention in multiple-record acquisition mode for applications, such as RADAR, ultrasound, and event recognition, which require short trigger rearm times. Additionally, the user can timestamp each triggered event with 100 ps resolution in both single-shot and various record acquisition modes. The PXIe-5122 can also stream information persistently from installed memory to have memory for longer acquisitions and streaming to disk.
Each National Instruments Digitizer accompanies the IVI-compliant NI-SCOPE driver, which is completely compatible with NI LabVIEW, LabWindows/CVI, and Measurement Studio for Visual Studio 6.0 and.NET. NI-SCOPE incorporates more than 50 built-in estimation and examination capacities, along with an intuitive SCOPE Soft Front Panel.
The high-resolution NI PXI-5122 Oscilloscope/Digitizer is suited for a wide assortment of uses in automotive, communications, scientific research, military/aviation, and consumer electronics.
This Oscilloscope comes equipped with these features:
• A 100-MHz, 100 Msamples/sec, 14-bit digitizer in PXI format
• Two channels all the while tested at 14-bit resolution
• 100 Msamples/sec real-time and 2.0 Gsamples/sec random interleaved sampling
• 100 MHz transmission capacity
• 50 ohm or 1 Mohm input impedance, programming selectable
• 200mV to 20V info go
• 75 dBc SFDR and 62 dB SINAD
• 8, 32, or 256 Mbytes of memory for each channel
• Edge, window, hysteresis, video, and advanced triggering with 100 ps timestamping
• Compatible working frameworks: Windows 2000/XP
• Includes NI-SCOPE driver programming
Bus connector: PXI Express
Analog input impedance: 1 MΩ, 50 ohms
Maximum oscilloscope bandwidth: 100 MHz
Maximum sampling rate: 100 MS/s
Analog input voltage range: -10 V to 10 V
Analog input resolution: 14 bits
FPGA: -
Number of voltage input channels: 2
