National Instruments SbRIO-9265 C Series Current Output Module with 4-channel 0-20 mA Range and 100 kS/s per Channel for CompactRIO

国家仪器 sbRIO-9265 C 系列电流输出模块

国家仪器 sbRIO-9265 (部件编号: 780921-01) 是 C 系列的 4 通道,无封装的电流输出模块.该模块配备了集成开环检测功能——这一强大功能可确保整个系统的安全性.NI sbRIO-9265 是控制和接口工业执行器的理想解决方案,适用于高频率应用.该模块有 4 个电流输出通道,可以在 0 –20 mA 范围内生成电流输出.每个电流输出通道都有一个专用的数字-模拟转换器来生成电流信号.这些 DAC 将数字信号转换为电流信号.四个模拟输出通道可以通过模块前面板的 10 位可拆卸螺钉端子连接器进行访问.

Each output channel (AO) of the National Instruments sbRIO-9265 C Series Current Output Module has a common terminal. This C Series Current Output Module requires an external power supply. For power supply connections, a power supply voltage terminal and a power supply common terminal are provided in the main screw terminal connector. The National Instruments sbRIO-9265 Current Output Module is capable of operating loads through the current output channels. Thus, you can connect a separate load to each analog output channel. On startup and shutdown, it is ensured that the current output channels are passing 0.0 mA of current. In typical operating conditions, the NI sbRIO-9265 can supply up to 21.0 mA maximum current and can drive 600 ohm maximum load. This module features built-in overvoltage and short-circuit protection. The setting for overvoltage protection is ±40 V.

conformal coating: 无
sealed: 无
前连接: 螺丝端子
模拟输出通道数: 4
最大更新速率: 100 kS/s/通道
支持的硬件平台: CompactRIO
输出电流范围: 0 mA 到 20 mA